H&R Wheel Spacers Porsche 968 (1984-1995) 7mm 14mm 15mm 21mm 23mm 28mm 32mm 35mm
Fitment Information
- Porsche 968 (1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995)
Specs & Features
- Bolt Pattern: 5/130
- Center Bore: 71.6
- Bolt or Stud: Stud
- Thread Type: 14x1.5
- Sold as a pair
-
Series Options:
- DRS Series - DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included).
- DRM Series - DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs.
Product Description
Wider is Better! H&R TRAK+ Wheel Spacers move your wheels and tires outwards so they are more flush with the fender‚ instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+ you can fill the gap in your fenders and GO WIDE!
TRAK+ Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+ Wheel Spacers are hubcentric and feature a full contact hub‚ just like the factory hub‚ for even load force distribution and lateral support.
Important
7mm DRS Wheel Spacer
- These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure the vehicle hub to verify sufficient height will remain to center the wheel after spacer installation.
21mm / 21mm Black / 23mm DRM Wheel Spacer
- If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel. If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
14mm / 15mm DRS Wheel Spacer
- The front hub height may be too tall to allow the wheel spacer to seat properly on the hub. In this case no spacers can be used.
21mm / 21mm Black / 23mm / 28mm / 32mm / 35mm DRM Wheel Spacer
- The front hub height may be too tall to allow the wheel spacer to seat properly on the hub. In this case no spacers can be used.
Original: $98.96
-65%$98.96
$34.64
Description
Fitment Information
- Porsche 968 (1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995)
Specs & Features
- Bolt Pattern: 5/130
- Center Bore: 71.6
- Bolt or Stud: Stud
- Thread Type: 14x1.5
- Sold as a pair
-
Series Options:
- DRS Series - DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included).
- DRM Series - DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs.
Product Description
Wider is Better! H&R TRAK+ Wheel Spacers move your wheels and tires outwards so they are more flush with the fender‚ instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+ you can fill the gap in your fenders and GO WIDE!
TRAK+ Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+ Wheel Spacers are hubcentric and feature a full contact hub‚ just like the factory hub‚ for even load force distribution and lateral support.
Important
7mm DRS Wheel Spacer
- These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure the vehicle hub to verify sufficient height will remain to center the wheel after spacer installation.
21mm / 21mm Black / 23mm DRM Wheel Spacer
- If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel. If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
14mm / 15mm DRS Wheel Spacer
- The front hub height may be too tall to allow the wheel spacer to seat properly on the hub. In this case no spacers can be used.
21mm / 21mm Black / 23mm / 28mm / 32mm / 35mm DRM Wheel Spacer
- The front hub height may be too tall to allow the wheel spacer to seat properly on the hub. In this case no spacers can be used.
